Radiant Imaging Labs

The Edit page

The Edit page holds the develop panels, from overall tone down to fine detail. Most photos only need the first few. Work top to bottom, and stop when the photo looks right.

The Edit page
The Edit page
#ControlWhat it does
1Recipe rowShows which recipe the photo uses. Click Save… to save your settings as a new recipe.
2AutoGives the panel an automatic starting point, here on Tone
3Drag grip in Customize sectionsDrag a panel by its grip to move it up or down the page

The panels

PanelWhat it does
Auto LiftBrightens darker tones in one move. Choose Gentle, Balanced or Strong, then set Amount.
ToneOverall brightness and contrast, with an Auto starting point
HDREdits for HDR displays, with HDR Limit and Visualize HDR
LevelsBlack, gray and white points per channel, with eyedroppers
CurvesPoint and Parametric Curve adjustments, presets, and .acv import
White BalanceTemp and Tint, presets and an eyedropper
ColorVibrance and Saturation, plus a black-and-white mode with its own mixer
Selective ColorHue, saturation and luminance for six color bands, plus Split Color Warmth
Color WheelsColor for shadows, midtones and highlights
Color GradingApplies a Look or a lookup table, with Strength up to 200
EffectsClarity
VignetteDarkens or lightens the edges, in three styles
DetailSharpening and noise reduction

A photo with a Raw Composite takes its exports from the composite, not from these panels.

When you click Auto

Every Auto button says what it did in a message over the photo, for example Tone Auto: set by Enhanced Contrast and Brightness (Contrast only).

  • Point at the message to read the details, such as the values Auto set or why it held back.
  • Click Undo in the message to take the Auto back. It works while that Auto is still your last change to the photo.
  • The message goes after 7 seconds. It stays while the pointer is over it, or while it has keyboard focus.
  • When there was nothing to change, the message says so, for example Tone Auto: nothing to change. That's what you see when you click the same Auto twice. There is nothing to undo.
  • When Auto can't measure the photo, it says so. If it changed nothing, the message says that too: White Balance Auto: couldn't measure the photo. Nothing changed.
  • Screen readers read the message, then its details.

The step buttons under the Auto of Tone and White Balance, such as Brighter and Warmer, follow the same rules. Each step is one undo step, with its own message and Undo. See Step Auto's result and Step it cooler or warmer. A goal from the Goal row of their ▾ follows them too. See Run Auto once with a goal.

Each panel's Auto replaces only what an Auto set in that panel before. So Tone's Auto and Levels' Auto can stand together. The sliders an Auto doesn't set keep your own values.

Tone's Auto and Auto Exposure change the photo's brightness. So when a Levels Auto or a Curves Auto is already on the photo, it runs again with its own method on the new picture, in the same undo step: Levels first, then Curves. The photo isn't brightened twice, and you get the same picture whichever Auto you click first. Develop > Auto does the same with a Curves Auto that's already on the photo. Auto Exposure also replaces the Auto that stands in Tone, from Tone's Auto or from Develop > Auto: what that Auto set goes back to its default, and only Exposure is set.

Develop > Auto (⌘U, Ctrl+U on Windows) applies the Automatic recipe to the photo and says what it set, with Undo. See Recipes.

While a panel still holds exactly what Auto set, its header shows a small Auto chip. Point at it to see which Auto set the panel, for example Set by Tone Auto, Enhanced Contrast and Brightness. Under that it reads This section still holds what Auto set. Change a value here to make it your own. When Radiant Raw has no record of which Auto it was, you see only that sentence. Change a value in the panel, undo the Auto or reset the panel, and the chip goes. Auto Lift, Tone, Levels, Curves and White Balance show it.

To see what an Auto would do before you click, rest the pointer on a method in the ▾ of Tone, Levels or White Balance, or on a level of Auto Lift. The photo previews it, and nothing changes until you click. See Preview a method before you click.

Compare every method side by side

To see every Auto method's result on your photo at once, choose Compare Methods… at the foot of the ▾ of Tone, Levels or White Balance. The ▾ of Tone and of Levels both open Compare Methods: Tone and Levels, with Tone's two methods and then Levels' five. White Balance's opens Compare Methods: White Balance, with Neutral areas and Edges and detail. Develop > Compare Auto Methods… opens the Tone and Levels view too. It also works in Info Only, where Info fills the panel, but not while Crop & Straighten is open.

First, Radiant Raw works out each method's result on this photo, with the options in its menu as they stand. While it does, the top of the photo shows Measuring each method…. Press Esc to stop. Then nothing opens and nothing changes. Changing the photo, moving to another photo, starting an export, opening Crop & Straighten or turning on Info Only stops it too. The ▾ row is dimmed while the photo is still loading or an export is running. Point at it to see why.

The view then opens over the window. It shows one tile large, with every tile in a strip below, in this order:

  • Your current settings: your photo as it is now. It shows only when no method gives that same picture.
  • As shot: for Tone and Levels, the photo with every setting these methods change at its default. For White Balance, the photo at its as-shot white balance. Your other settings stay as they are. This tile is there to compare with. You can't use it.
  • Every method, in the order of its ▾.

A gold ring marks the tile that looks like your photo now. When two methods give the same picture on this photo, they share one tile. In the grid, its tooltip names the other method, for example Enhanced Contrast gives this same picture on this photo. A method's tile can show the words the ▾ rows show, such as Brighter or Warmer. They compare it with the default method of the button you came from, Tone's for the Develop menu. The default's own tile shows none. A method that can't run on this photo still gets a tile. The tile says why, and you can't use it.

Beside the large tile, What this method sets lists each value the method's message would give, for example Exposure +0.41. Under each value you see Your photo now: +0.10, or Same as your photo now. A last row can add what the message would say, with the reason under it:

  • Held back: the method held back, for example to keep the highlights.
  • Partly corrected: Neutral areas would take out only part of a color cast.
  • Midtones: what Push to Dark and Light would do to the midtones.

To move around the view:

  • Press ← or → to step from tile to tile, or click a tile in the strip.
  • Press G, or click Grid, to see every tile at once. Click One at a Time to go back.
  • In the grid, point at a tile to read what its method does, as its ▾ row's tooltip says.
  • A tile whose picture isn't ready yet shows Rendering….

To use a method, click Use This Method, press Return (Enter on Windows), or double-click its tile. Radiant Raw runs that method once, in one undo step, with the same message over the photo as a click in the ▾. Your Auto default stays as it was. The tile with the gold ring is your photo already, so using it changes nothing. To leave with nothing changed, click Close at the top left or press Esc.

Make the page your own

  • Hide panels you never use, and drag the rest into the order you like.
  • The Recipe row at the top shows which recipe the photo uses. Click Save… to save your settings as a new recipe. See Recipes.

Tip

Can't find a setting? Press ⌘, (Ctrl+, on Windows) to open Settings, then ⌘F (Ctrl+F on Windows) to search it.

Learn more