Radiant Imaging Labs

Radiant updates

From card to client in one window

Follow one portrait session through Radiant Raw, the raw developer for Mac and Windows, from the moment the folder lands on the window to a set of watermarked files ready to send.

The card comes home

The light went at about seven, and the session went with it. Now the bag is on the floor, the card is in the reader, and a family is waiting to see what you made of their evening in the park.

You copy the card’s folder to your drive and drag it onto Radiant Raw. Every raw inside opens as one batch, and the develop window fills the app window: the photo in the center, the panel on the right, the filmstrip below. If you shot raw plus JPEG, the JPEGs are skipped with a short notice, because Radiant Raw develops camera raw files.

Radiant Raw reads thirteen raw formats, from CR3 and NEF to ARW, RAF and DNG, covering more than 400 cameras sold under more than 550 model names (the full list is in Supported cameras). Because this is your first raw, it asks “Download lens profiles?” You choose Download. No account is needed, nothing about you or your photos is sent, and from now on it checks for new profiles about once a month.

Develop the frame that matters

You click through the filmstrip to the frame you already know is the one: the whole family, backlit, everyone looking at the camera. The Edit page opens with Tone; its thirteen sections run from Auto Lift and Tone to Color Grading and Detail.

The faces sit in shade against a bright sky, which is where Auto Lift comes in. You pick Balanced and nudge the Amount. In Tone you pull Highlights down to hold the sky, holding Option (Alt on Windows) as you drag to see where it clips.

The last of the sun has turned everything orange. You arm the White Balance eyedropper, and a pixel loupe follows the pointer, showing exactly which pixels the click will average, with an RGB readout. You click the gray stone of the path. The eyedropper disarms, and Radiant Raw fine-tunes until that point reads neutral, in one undo step. A point too dark to measure reliably changes nothing, so a stray click in deep shadow won’t skew your color. Then you warm it back a touch with Temp.

On the Optics page, Radiant Raw has matched a lens profile from the photo’s EXIF, and you turn on its distortion, chromatic aberration and vignetting corrections. Lifted shadows can also lift shadow noise, so in Detail you set Noise Reduction to Light. Last, a Look: you hover over a few of the 24 included Looks (or your own .cube files, through Load Lookup Table…) to preview them on the photo, and double-click one. A new color Look starts at 75% Strength (black-and-white Looks start at 100%); you take it lower.

Keep the sky the camera saw

That sunset holds more light than a standard screen can show. On an HDR display (an EDR display on a Mac, or a Windows display with Use HDR turned on), the HDR section just below Tone lets you see and edit the range above SDR white. Click its Auto and Radiant Raw turns HDR on and sets the HDR Limit to the photo’s brightest point, in one step. Visualize HDR paints the stop bands over the photo; it is a view, not an edit.

Look closer before you trust it

Before this edit goes near the rest of the batch, you check it. Focus Points (⌥J, or Alt+J on Windows) draws the autofocus points your camera recorded, with boxes such as Face and Eye, for Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic and Pentax bodies (coverage varies by model). Focus points step aside while a crop is applied, so you check them before you frame.

Focus Peaking (⇧J, or Shift+J) is measured on the developed image, so it reflects your edits, and it gives a sharpness score out of 100. Then the Magnifier: press ` for a floating lens from 50% to 800%, with a pixel grid and Snap Aim to Eye.

Turn on Pro histogram in the histogram’s options menu and you can choose among four scopes: Histogram, Waveform, Parade and Vectorscope. You switch to the Vectorscope and show its skin line to check the skin tones against it, and J shows clipping, by default shadows in blue and highlights in red.

Rate the shoot from the keyboard

Now the cull. You work through with the keyboard: 1 to 5 for stars, P to pick, X to reject, 6 to 9 and the minus key for color labels. Add Shift and Radiant Raw applies the mark and moves to the next photo.

Every mark goes to an .xmp sidecar beside the raw, DNG included, and never into the original file: IMG_0517.CR3 gets IMG_0517.xmp. XMP is the standard file other photo apps read, so tonight’s picks are there for them too. It works the other way as well: Radiant Raw reads ratings and labels from existing .xmp sidecars and from the file’s own metadata, so stars you gave elsewhere show up when you open the folder. Develop settings save beside each photo too, as .radiant, .xmp or both (both by default), whenever you move to another photo. There is no save prompt when you quit.

The raws on your drive are exactly as the camera wrote them.

In the Info panel’s Metadata section you fill in your contact details and copyright, then Save as card… so Apply card can add them to other photos. Like the marks, metadata is saved in a sidecar, not in the raw.

One edit, the whole set

Back on the frame you developed, you press C, choose 5:4, drag the handles and press C again to apply. Then you select the other keepers in the filmstrip (Shift-arrow extends the selection) and click Sync selected in the bottom bar.

Sync keeps each photo’s own white balance and red-eye, asks before it replaces edits already on those photos, and makes one undo step per photo. Auto Lift travels as a level and an Amount and is measured again on each photo, so a frame shot in open shade gets its own lift rather than a copy of the backlit one. When you do want white balance to travel, Copy Settings… lets you tick it; it starts unticked.

Set the output once

Delivery settings live in Settings › Output. The defaults are 16-bit TIFF in Adobe RGB (1998), and an ICC profile is always embedded. For tonight’s online gallery you switch File type to JPEG, whose default Color space is sRGB, and leave JPEG quality at its default of 91. And that sunset frame keeps its extra light: the first time you export a photo with HDR, Radiant Raw asks “Include HDR with this export?” Say yes, and photos with HDR go out as HDR (gain-map) JPEGs in Display P3, so displays that support it show the extra brightness.

Sign it, then send it

The Watermark row offers None, your default, or any saved watermark. Edit… opens the Watermarks window, which Radiant Photo, Radiant Raw and Radiant Flow share on the computer, so one signature serves all three. A mark can be text, a logo, or both, as a single mark or tiled, starting from templates such as Corner signature and Proof tile. Text fields such as Year, Creator and Copyright fill in from each photo’s metadata, and an empty field is left out. On an HDR photo the gain map is held neutral under the mark, so the mark never glows on an HDR display.

Back in the window, you set the Selects filter to Picked, so Export takes only the photos in view, and press Export (⌘E, or Ctrl+E on Windows). Radiant Raw saves your settings beside each photo first, then writes the files (“Exporting 2 of 4…”). Every JPEG, PNG and TIFF carries the mark, placed on each photo’s own frame after crop and rotation, and the first file is shown in Finder or File Explorer.

The raws on your drive are exactly as the camera wrote them; your edits, marks and metadata sit in sidecar files beside them, and the finished files wait in your output folder. Press Done, and tonight’s shoot waits on the Home screen as a single tile under Recent.

Try it on your next card

Radiant Raw works on its own: open, develop and export. If you also use Radiant Photo, Edit in Radiant Photo sends a photo on when it needs retouching beyond red-eye. From Radiant Flow, Open in Radiant Raw brings your selected photos straight in.

It is the same app on Mac and Windows, with the same tools, panels and HDR editing; and the shortcuts follow each platform. Choose from 37 interface languages, set once for all three Radiant apps (the picker is marked Beta: some languages are machine translations and may be incomplete).

Radiant Raw runs on a Mac with Apple silicon or an Intel processor running macOS 14 Sonoma or later, or on a PC with an Intel or AMD processor running 64-bit Windows 10 (version 22H2) or Windows 11. ARM-based Windows PCs cannot install it. System requirements has the details.

Radiant Raw 1.0 is available now, with a 30-day free trial that you start in the app. The Radiant Raw page has the price, and the Support Guide gives the exact menus and keys.

Radiant Raw · Read the Support Guide

Bring a full card. Radiant Raw will take it from there.

The Radiant newsletter

A weekly email from Radiant Imaging Labs: new articles, photo tips and release news.

← All articles