Radiant Imaging Labs

Tone

The Tone tools set the light in your photo: its exposure, its contrast and its depth. Work with Tone first, because tone changes affect how every color looks. You'll find the Tone panel on the Adjustments page of the right panel. Press T to open it.

The Tone panel with each tool numbered
The Tone panel with each tool numbered
#ControlRange (default)What it does
1Exposure0 to 150 (100)Corrects the light in every pixel of the photo
2Face Aware ExposureOn / OffTakes faces into account when Exposure works
3Super Contrast0 to 50 (0)Adds depth and pop to a flat photo
4Light Diffusion0 to 100 (10)Softens the light and lowers contrast
5Depth0 to 100 (20)Adds contrast in every pixel so details stand out
6White Point, Black Point0 to 100 (0)Fine-tune the brightest and darkest areas
7Light−Six manual sliders for exposure and contrast

Each tool has a checkbox. Moving a tool's slider, or picking one of its choices, selects its checkbox for you. Double-click any slider to return it to its default.

Correct the exposure

Exposure looks at every pixel and gives each one the light it needs. It's as if every pixel had its own aperture, blended smoothly, with no masks or selections. This is the tool with the greatest effect on the rest of your edit, which is why it comes first.

When Radiant Photo opens a photo, it picks an exposure correction for that photo on its own. That's why the Exposure value changes from photo to photo. Choose how strong that automatic correction is:

ChoiceWhat it does
LowThe smallest correction this photo needs
MediumA standard correction, up to 100
HighA brighter correction, up to 150

While one of them is selected, the Exposure value shows the amount the automatic correction used on this photo.

To set the amount yourself, drag the Exposure slider. This turns off the automatic choice, so none of Low, Medium or High stays selected.

Tip

The Enhance slider in Smart Editing also changes exposure. Use the two together. See The Smart Editing tools.

Protect faces

For photos of people, set Face Aware Exposure to On. Exposure then balances the faces it finds against the background light, so people are neither too dark nor too bright. Leave it on when you build a recipe for a batch of portraits.

Note

Dragging the Exposure slider sets Face Aware Exposure to Off. Set it back to On if you want faces to guide the correction again.

Add contrast and depth

  • Super Contrast adds depth and pop. It also makes many photos look sharper. Try it on a photo that looks flat after an exposure correction, or one shot in harsh light.
  • Light Diffusion gives softer light with less contrast. It's lovely on portraits, where it also softens blemishes. Skin tones often turn a little warmer, so keep the amount modest.
  • Depth increases the contrast in each pixel, so fine details are easier to see. Choose how it works:
ChoiceWhat it does
ContrastIncreases the difference between light and dark areas
DefinitionBrings out detail in shadows and highlights, and corrects faces better

Tip

More Depth makes a photo slightly darker overall. Raise Exposure a little to compensate. On a very dark photo, try turning Depth off to reveal shadow detail.

Set the white and black points

White Point fine-tunes the brightest pixels and how much the correction targets bright areas. Black Point sets where black begins. A higher Black Point value leaves more of the dark areas alone.

Tip

Press J to show clipping warnings while you work. Avoid pushing large areas into pure white or pure black, because you lose detail there.

Fine-tune by hand with the Light card

Click Light to open a card of six manual sliders: Exposure, Contrast, Highlights, Shadows, Whites and Blacks. Each runs from −100 to +100 (default 0).

These are the same six settings as in Finishing Tools. A change in one place shows in the other. You can also drag on the histogram to move five of them. See Histogram and scopes.

Hold ⌥ (Alt on Windows) while you drag Exposure, Highlights, Shadows, Whites or Blacks on the Light card to see where the photo clips. The clipped pixels are painted over the photo in the color of the channel that clips: white where all three channels blow out, black where all three go to pure black. Let go of the key or the mouse to clear it. Contrast has no clipping preview.

The Light card open, with its six sliders and the HDR section
The Light card open, with its six sliders and the HDR section

HDR photos

The Light card ends with an HDR section for photos with high dynamic range.

ControlRange (default)What it does
HDR Limit1.0 to 8.0 stops (4.0)Sets how far above standard white the brightest areas can reach. Moves in steps of 0.5.
Visualize HDROn / offPaints the bright range above standard white as bands, so you can see where it is

Visualize HDR works only while HDR preview is on and your display shows HDR. HDR Limit is saved with the photo. When you change it, a Reset HDR button appears in the section heading.

Under Visualize HDR, SDR Settings sets how the photo looks wherever it is shown or saved without HDR. Click it to open the group. Select Preview for SDR to see that version on the canvas and to turn on its seven sliders: Brightness, Contrast, Clarity, Highlights, Shadows, Whites and Highlight Saturation. Each runs from −100 to +100 (default 0). While Preview for SDR is selected, every standard (SDR) save and print uses these settings. So does the standard picture inside a JPEG HDR or AVIF HDR file, and the HDR picture itself stays as it is. Visualize HDR is unavailable while Preview for SDR is selected. See HDR photos.

For HDR preview, the HDR mode in the Edit header and saving HDR files, see HDR photos.

Start over

Point at the panel header and click the reset button (Reset Tone) to return the Tone tools to their defaults. The Light card's six sliders belong to Finishing Tools, so Reset Tone leaves them as they are. Reset them from the Finishing Tools panel.

Learn more