Using Radiant Photo with Photoshop
The Radiant Photo filter opens the current Photoshop layer in the full editor. When you click Done, the edit comes back into the same layer, at the same size. It works on Mac and on Windows.
Where your layer opens
Your layer opens in Radiant Photo Host, a separate app that comes with Radiant Photo. It has its own window and its own icon in the Dock (the taskbar on Windows). An edit from Photoshop never interrupts what you're doing in Radiant Photo.
- The Host starts by itself when the filter sends it a layer. After 10 minutes with nothing to do, it quits.
- The editor and the bar under the photo on this page are the Host's.
See Radiant Photo Host.
Install
The Radiant Photo installer puts the filter in Photoshop's shared plug-ins folder, which every current version of Photoshop loads. The filter is tested with Photoshop 2026. Quit Photoshop first: the installer asks, and never closes it for you.
If Radiant Photo 2's filter is installed, the installer moves it aside so the two don't clash. Uninstalling Radiant Photo puts it back.
Edit a layer
- Open a photo in Photoshop and select the layer you want to improve in the Layers panel.
- Choose Filter > Radiant Imaging Labs > Radiant Photo 2.... The editor opens with your layer.
- Edit as usual. Photoshop waits until you finish.
- Click Done to send the edit back to the layer, or Cancel to leave the layer as it was.
| Control | What it does |
|---|---|
| Document name | The Photoshop document the edit goes back to. |
| Cancel | Leaves the layer untouched. Closing the photo does the same. |
| Done | Writes the edit into the layer and returns you to Photoshop. If you quit the app with an edited layer open, the edit goes back too. |
The filter works on RGB documents with 8 or 16 bits per channel. Photoshop grays it out for CMYK, Lab, Grayscale and 32-bit documents.
Note
Your document's size never changes. While a Photoshop layer is open, the Crop & Straighten tools stay closed. If a crop arrives another way, such as pasted settings, the bar says Photoshop gets this layer back without its crop, rotation or flips.
If Done fails, the bar shows Export failed: and the reason. The photo stays open, so you can try again or cancel. Press Esc in Photoshop to cancel while it waits.
If Radiant Photo isn't activated, or its trial has ended, Photoshop can't complete the filter and gives Radiant Photo's reason, in the language Radiant Photo is set to: Radiant Photo is not activated on this computer. Open Radiant Photo to activate it, then try again. The layer stays as it was. Activate Radiant Photo, then choose the filter again.
What comes back
- The layer is replaced with the edit, at the same size and in the document's own color profile.
- Watermarks are never applied to a Photoshop layer.
- Colors outside sRGB are clipped when the editor works in sRGB, its default. To keep wider colors, choose a wider space under Work in in Settings > Color.
Work non-destructively with Smart Filters
Apply Radiant Photo to a Smart Object and Photoshop keeps it as a Smart Filter you can change later.
- Select the layer and choose Filter > Convert for Smart Filters.
- Choose Filter > Radiant Imaging Labs > Radiant Photo 2..., edit, and click Done.
- To change the edit, double-click Radiant Photo 2... under the layer in the Layers panel. The editor reopens with your settings.
If the layer's pixels changed since your last edit, the bar says This layer changed since it was last edited here, so its Spot Removal and face edits were left out.
When Photoshop renders the Smart Filter again by itself, it replays your recorded edit. Some edits can't be replayed that way, such as per-face Face Light or faces you added by hand. Then the step stops with this Radiant Photo step can only run with its dialog: and the layer is left as it was. Double-click the filter to edit it.
The Radiant Photo panel
The installer also adds a Radiant Photo panel to Photoshop 23.3 or later, on Mac and Windows. Choose Plugins > Radiant Imaging Labs > Radiant Photo to open it.
- Choose a Workflow, a Recipe, the Strength, a Look and its Look strength.
- Under Output, choose Smart Filter, New layer or Same layer.
- Click Apply to run Radiant Photo on the layer without opening it. Or click Edit in Radiant Photo: Radiant Photo opens on the layer with your choices already applied, so you can finish the edit there.
Mix changes the result's opacity without running Radiant Photo again. Each run is one step in Photoshop's History.
Find a Look
Under LOOKS, the panel lists Radiant Photo's Looks. Each row shows Radiant Photo's thumbnail of the Look, its name and its collections.
- Type a name in Search Looks, or pick All Looks, Favorites or one of Radiant Photo's collections in the menu beside it.
- Click a Look. It becomes the Look above.
- Click Apply to use it.
A Look you don't have yet shows Get more Looks in Radiant Photo. Click it, and Radiant Photo opens where you can get it. If the list stays empty, open Radiant Photo once. Then its Looks are listed here.
Copy Radiant to other layers
- Select a layer with a Radiant Smart Filter and click Copy Radiant.
- Select the layers you want and click Paste Radiant. Each one gets Radiant as a Smart Filter, in one History step.
- To paste on other documents, click Paste on open documents… and tick the documents. Each document gets one History step.
Paste leaves out what belongs to the photo you copied from: heals, faces added or removed, per-face Face Light and local adjustments. The panel names what it left out. The same commands are under Plugins > Radiant Imaging Labs.
Edit as a linked layer
Edit as linked layer sends the layer to Radiant Photo. You can keep working in Photoshop while you edit. The edit comes back as a linked Smart Object.
While Radiant Photo has the layer, the panel says Radiant Photo is editing this layer.
- Return asks Radiant Photo to save the edit and send it back into the layer.
- Cancel ends the edit without saving it. The layer stays as it was.
If Radiant Photo closes or quits first, the panel says so and offers Edit again. The layer stays as it was.
Apply to part of a photo
Make a selection, then run the filter. Radiant Photo analyzes the whole photo, so the selected area gets the same correction as a whole-photo edit. Only the selection changes. To blend the edit by hand, use a Smart Filter and paint on its mask.
Raw files and actions
- Raw files: open the raw file through Camera Raw as a Smart Object, then apply the filter. Do the raw-only work in Camera Raw (lens corrections, rescuing exposure) and leave color and tone to Radiant Photo.
- Actions: record the filter in an action to repeat it on many photos. Actions recorded with Radiant Photo 2's filter still play. A step with its dialog turned on opens the editor for each photo.
- The Radiant actions: Radiant Photo comes with a set of ready-made actions named Radiant. The panel offers to add it to the Actions panel. Its Auto (keeps Smart Objects) action adds the automatic correction as a Smart Filter. The Background, the layer a photo opens as, becomes a Smart Object first. A Smart Object gets the Smart Filter as it is. On any other pixel layer, such as a PNG's Layer 0 or a layer you added, it corrects the pixels themselves; play Auto as Smart Filter on such a layer instead.
- An older Radiant set: if your Actions panel still has a Radiant set from an earlier install, Photoshop plays its steps, not the new ones. Then the panel asks Replace the older Radiant actions? when it opens. Choose Yes, Always, No or Never. A set Radiant installed before is removed. A set you changed is kept, renamed Radiant (earlier). To check again later, click Ask again beside Replace an older Radiant action set under SETTINGS.
- A Radiant set from an earlier install: its Auto (keeps Smart Objects) may be the earlier one, which puts a Smart Object inside a new Smart Object. The panel can't tell that set from the new one, so delete the Radiant set in the Actions panel, then close and open the Radiant panel to add the new one.
Other apps that load Photoshop filters
- Photoshop Elements 2022 to 2027: installed for you. In the Photo Editor's Expert mode, choose Filter > Radiant Imaging Labs > Radiant Photo 2....
- Affinity Photo, PaintShop Pro, ON1 and ACDSee: point the app at Photoshop's shared plug-ins folder. The installer never changes another app's settings.