Radiant Imaging Labs

Importing from a memory card

Radiant Flow copies photos from a memory card to your disk, checks every copy, and tells you exactly what landed. You choose what to import and where it goes. You can then delete the originals from the card, but only once every copy is checked.

The same importer also copies from a folder, for example a card you already copied to your desktop. It also copies from a phone, tablet or camera on a cable. See Import from a phone, tablet or camera.

When you insert a card

A banner appears at the top of the sidebar. Flow never copies anything until you start the import yourself in the importer.

ControlWhat it does
Import photos from “EOS_DIGITAL”?Names the card you inserted.
Facts lineHow many photos are on the card, how much space they take and, when one camera made them all, which camera.
Import…Opens the Compact Importer for this card.
IgnoreHides the banner until you take the card out and put it back.

When Flow has already called the card used up, the banner says so under the facts line: Used up · safe to format in the camera, then when and where it went, for example Imported and checked Oct 31, 2026 to Shoots. If the camera has added photos since, it says how many instead, for example 3 new since Oct 31, 2026 · import first. See When a card is used up.

The banner disappears by itself when you eject the card. To open the importer straight away, or to show nothing, change Settings > Import > When a card is inserted.

A card is a removable disk with a DCIM folder at its top level. That is a card in a card reader, or a camera set to mass storage. A phone, tablet or camera that connects as a camera, not as a disk, is a device. See Import from a phone, tablet or camera.

On Windows, the banner, the importer, the receipt and the report call a card by its label, for example EOS_DIGITAL. Only the sidebar and the Source menu add the drive letter, as in EOS_DIGITAL (G:).

After your fifth import, Radiant Flow asks once: Open Radiant Flow when a card, phone or camera is plugged in? Click Open automatically to have Radiant Flow start by itself when you insert a card or plug in a phone, tablet or camera, or Don't ask again. You can change the answer later in Settings > Import.

Ways to start an import

CommandShortcutWhat it opens
File > Import from Card…⇧⌘I (Ctrl+Shift+I on Windows)The Compact Importer. With no card connected, the row is grayed out with No memory card detected.
File > Import 3 Selected from Card…⌥⇧⌘I (Ctrl+Shift+M on Windows)The Compact Importer, with the photos you selected in the grid already checked. Also on a photo's right-click menu.
File > Import from Card as a Page…NoneThe Card Importer page: the same import with more room.
File > Import from Folder…NoneAsks for a folder, then opens the Compact Importer with that folder as the source.

Cull on the card first

You can open a card in the grid and cull it before you import. Ratings, flags and labels you set on the card are kept in Radiant Flow and written to the copies once they are verified.

File commands such as rename and organize are grayed out on a card, with Radiant Flow never writes to a camera card.

  1. Open the card in Devices and rate, flag or label your photos. See Culling a shoot.
  2. Select the photos you want, for example with a filter on your picks.
  3. Choose File > Import 3 Selected from Card… (⌥⇧⌘I, Ctrl+Shift+M on Windows).

The Compact Importer

The Compact Importer opens over the window, with the card's photos on the left and your choices on the right. One row runs above the photos. It starts with a button named for the card. At its right end, level with the edge of the grid, come the Kind menu, the sort button and All, None and Invert. Over the options, the same row holds the Settings heading. The bar at the bottom holds the count line, Show previously imported, Cancel and the Import button.

ControlWhat it does
Import from “EOS_DIGITAL”The title names the card.
Full Importer…In the title row, for a memory card. Closes the Compact Importer and opens the same card on the Card Importer page, with the same destination. Nothing is copied first. Not offered for a folder or a device.
SourceThe button at the start of the row names the card you import from. Click it to choose another: every connected card, then every connected phone, tablet or camera, then Choose a folder….
Show previously importedIn the bottom bar. Shows or hides photos you have imported before and photos already in the destination. On by default.
All, None, InvertChecks every photo, unchecks every photo, or swaps the two.
A tile's type markAt the bottom right of every tile: the file type, for example JPG, RAW, HEIC or MOV. A video, a recording or a Live Photo also shows a small glyph.
A tile marked R JAt the bottom left: a raw file and the JPEG the camera shot with it, on one tile. Checking it imports both.
A tile marked ImportedAt the top right: a photo you imported before.
Count lineAt the left of the bottom bar. How many photos are checked, how many were set aside, and what stays on the card.
Section headersThe seven sections of options. A closed section shows its current setting at the right of its header, dimmed.
CancelCloses the importer without copying anything.
Import 271 photosStarts the import. The button names how much it will copy.
Sort byThe arrow button before All. How the photos are grouped and ordered on screen. It doesn't change what is imported.

Import a card

  1. Check that Source shows the right card.
  2. Uncheck any photos you don't want. Every photo starts checked, except ones you imported before and ones already in the destination folder.
  3. Under Destination, click Choose… and pick a folder.
  4. Set any other options you want. See the table below.
  5. Click Import 271 photos.
  6. Read the summary, then click Import 271 photos to start. The button uses the same words as the importer's own. Click Back to change something first.

The summary lists where the photos land (To), how they are named (Names), the other destinations (Backup) and what happens afterwards (After). When you typed keywords, it lists them too (Keywords). It always matches what the import will do.

To names the first folder that the preview in Setup lists, for example Shoots/2026-10-31. On the Card Importer page, it names the destination folder. A long To or Backup line wraps onto a second line, so every folder shows.

Thumbnails fill in as you scroll, so you can start choosing before the whole card is read. Until a thumbnail is ready, its tile shows a small, still loader. A file Flow can't draw shows a plain file glyph and its name. Point at it and it says No preview for this file. It still imports. The Sort by button sets how the photos are grouped, and each group has its own check box:

  • Capture Time, the default for a card: one group for each day you shot.
  • Newest First: the days the other way round, the newest photo first. A phone, tablet or camera opens on this sort, because the photos you want are usually the last ones taken.
  • File Name: one group, All files, in file-name order, with IMG_2 before IMG_10.
  • Kind: Pairs, Photos, Videos and Audio, for the kinds on the card.
  • Checked First: Checked, then Not checked, as the photos were when you chose it. A photo doesn't move while you check it.

The sort changes only what you see. The photos are copied, and numbered by Rename on import, in the same order whatever you choose. Each importer remembers its own sort, and the Compact Importer remembers one for cards and one for devices.

To see a photo large before you decide, press Space on its tile or double-click it. The line under the photos reminds you at its right end when there is room. A double-click doesn't change the photo's check box. The large view shows the photo with its name, the name it gets when Rename on import renames it, for example Lands as 20261031_0412.CR3, its capture date and time, the camera and the file size. For a photo that was set aside, it says Imported or where the copy already is. A video shows a still frame, marked Video, and doesn't play. A raw file and its JPEG are one photo here, as on their tile.

  • → and ← move to the next and previous photo, in the order the grid shows them.
  • P checks the photo and X unchecks it, as Import this photo under it does. For a video the box reads Import this video. They never set a pick or reject flag.
  • Space, Esc or Close closes the view, and Flow goes back to the tile of the last photo you saw.

The keys are the same on a Mac and on Windows. To change them, go to Settings > Keyboard Shortcuts, under Importer. Space is the Quick Look key there, so moving it moves this one too.

Flow also looks in the destination folder and its subfolders for photos that are already there, however they got there. Meanwhile the count line says checking what is already in Shoots…. A photo it finds starts unchecked and is marked In Shoots. Point at the tile to see where the copy is, for example Already in Shoots/2026-11-07 as IMG_0412.CR3. The count line then adds how many, for example 2 already in Shoots, set aside.

A file there counts as the same photo when its name, size and capture time match. A file under another name must also have the same contents. A name alone is never enough. A raw file and its JPEG are marked only when both are there. Check a marked photo to import it anyway; the count line then stops counting it as set aside. A group's check box never checks a photo that was set aside, and its header counts every photo under it. A photo you imported before keeps its Imported mark instead.

Filter what you import

The Kind menu in the row above the photos sets what you import. It is laid out like the Kind menu in the Filter Row. All Items comes first. Under File Format come Photos, a row for each format and Videos, each only when the card holds that kind or format. Stars, flags and labels follow only when the card's photos carry them. So a card of photos in one format, with no stars, flags or labels, still has the menu, with All Items, Photos and that format's row. The menu stays gray until there is something to filter, and while an import runs. The stars come from the camera or from a sidecar file, and the flags and labels from a sidecar file.

GroupWhat you click
All ItemsShows every kind and format again. It is checked while none is hidden. Stars, flags and labels stay as you set them.
Photos and VideosShow or hide each kind, with how many the card holds. Photos is the first row under File Format, and Videos the last.
File FormatA row for each format on the card, for example one for the raw files and one for the JPEGs. A card with one format shows its row too. All are on to begin with. Click one to leave it out. A raw file and its JPEG stay while either format is on.
RatingA star keeps the photos with at least that many stars. Unrated keeps the photos with none.
FlagPicked, Unflagged or Rejected. A photo you protected in the camera counts as picked.
LabelNo Label or a color label.

Rating, Flag and Label come after a divider, each with its row of marks under its name. Clicking a mark leaves the menu open, so you can light several. Kind is lit while any part of the filter is on.

A photo must pass every group you use. Within a group, any mark you light lets it through. Point at a mark to see how many photos carry it. The formats don't apply to videos and recordings. A kind you hide under Kind isn't imported either.

A photo the filter hides isn't imported. The count line says how many, for example 2 hidden by the filter, not imported. The photo keeps its check, so it comes back checked when you turn that part of the filter off. Each card starts with no filter. With Then also import CARD_2 ticked, the filter applies to the other cards too.

Import several cards

At the foot of the Source menu, after a divider, a row appears for each other card in a reader: Then also import CARD_2. Click it to tick it. The menu stays open, so you can tick several. Once the Source card is done, Flow copies every photo on that card that you haven't imported before, with the same settings. The photos you check in the grid are the Source card's alone. The rows start unticked each time the importer opens, and they are gray while an import runs.

The summary counts only the Source card's photos and then names the other cards, because Flow reads each one when its turn comes. With Rename on import on, the numbers in the names carry on from one card to the next.

Each card gets its own receipt, offload report and delete. When you close one card's receipt, the next card's opens. If Flow can't read a card, or something would stop its import, it skips that card and says so: Not imported: CARD_2. Open each card in Import on its own to see why. The same message names a card that had nothing new: CARD_2 had nothing new, so nothing was imported from it. If the import left out everything on a card, for example its videos while Videos is unchecked in the Kind menu, or files the camera hadn't finished writing, it says Nothing was imported from CARD_2. It may still hold photos or videos this import left out.

The Card Importer page imports one card at a time.

When the button stays gray

The Import button stays gray, and the line under the photos says why in red, when something would stop the import:

  • Choose a destination folder. Click this line to pick the folder.
  • Select at least one photo.
  • The subfolder name will not work: followed by the reason.
  • Two destinations are the same folder.
  • The destination is inside “EOS_DIGITAL”. Choose one outside it.
  • Another file operation is still running — Import can start when it finishes.

The line under the photos shows one thing at a time. If several apply, point at it to see the others. When Flow stopped listing the card before the end, that comes first, not in red, for example Showing the first 850 items — the card holds more. The grid then doesn't show the whole card.

If the destination disk is too small, the line under the photos says so: Shoots has 2.1 GB free — this import needs 8.4 GB. Photos without a capture date don't stop the import. With One folder per shoot date they land in the destination folder itself. With a folder structure, they skip the structure's date folders and land higher up, in the destination folder itself when every folder in the structure is a date. Either way, the importer tells you how many.

When the card holds nothing to import, the count line says There is nothing to import on this card. When everything on it was set aside and Show previously imported is off, the grid says why it is empty, for example 271 already imported, set aside.

Options

Only Destination is open when the Compact Importer opens. Every other section is closed, and shows its current setting, dimmed, at the right end of its header. In Destination and Backup Location, a long path shows only its last two folders, for example …/OWC STX HDD/Shoots. Point at it to see the whole path. The importer remembers your choices for the next card, apart from the keywords and the releases you attached.

A closed After Import names the first option that is on and counts the rest, for example Validate every copy · 2 more. Point at it to see them all. With none on, it says Off. Inside the section, point at an option to see what it does.

Click a section's header to open or close it. Right-click a header for the same three commands as the Metadata panel's sections: Solo Mode, Open All Sections and Close All Sections. In the Compact Importer, the Settings heading above the sections has a ⋮ button that opens the same menu. A right-click on the heading opens it too.

  • Solo Mode is on when Flow starts: opening a section closes the others.
  • Open All Sections turns Solo Mode off first, so the sections stay open.
  • Option-click a header (Alt-click on Windows) to open that section alone, whatever Solo Mode is set to.
  • One setting serves the Compact Importer and the Card Importer page.
SectionOptionDefaultWhat it does
SetupSaved setupCustomApplies a setup you saved. Save setup… saves the current choices under a name; Update “Studio” and Delete “Studio” manage one.
SetupSubfolderAll in one folderA folder I name puts the photos in a folder you name. One folder per shoot date makes one folder for each day you shot, from the capture date. Under Structures, you can also file the photos the way Organize does. See Folder structures.
JobAdd imported photos to Job…OffAdds the imported photos to the Job you pick. Click New Job… to make one.
JobApply the Job's cardOffOnce the photos are verified, adds them to the Job and writes the Job's card to them.
KeywordsAdd keywordsNoneAdds the keywords you type to every imported photo once it is verified. Return or a comma ends each keyword.
DestinationChoose…NoneThe folder the photos go to. The line under it shows where the first photo lands. A long path loses its first folders; point at the line for the whole path.
RenameRename on importOffRenames the copies with a pattern. Under it, the section shows the first photo's old and new names, for example DSC_0001.CR3 → 20261031_0001.CR3. To see the name any photo gets, open it in the large view. On the Card Importer page, each tile shows the name it will get.
RenameExtensionUnchangedMakes the file extensions lowercase or UPPERCASE.
Backup LocationAlso copy to a second diskOffCopies every photo to a second folder as well, usually on another disk.
Backup LocationAdd another destination…NoneShown while Also copy to a second disk is on. Adds a row for a third, then a fourth folder, headed Destination 3. Each has its ✕ (Remove destination).
After ImportApply copyright cardYour default card (★), or NoneWrites a copyright card to every photo after it is verified.
After ImportAdd a “no AI training” noticeOffMarks every imported photo as not for AI training. The info button beside it says more. See below.
After ImportAttach releasesNoneClick Add… to attach signed release scans, and choose each one's type. They are copied into a Releases folder beside the photos. See below.
After ImportValidate every copyOnReads every copy back and compares it with the original. Turn it off and deleting from the card stays locked.
After ImportRe-read the card after copyingOffReads every original on the card again and checks it against the copies. The whole card is read twice.
After ImportBuild previews when doneOnMakes the previews of the imported photos in the background, so the folder is ready to cull.
After ImportScore with PRISM Photo Score when doneOnScores the imported photos in the background once the copies are checked.
After ImportEject the card when doneOffEjects the card when you are finished with the import. Not available for a folder.
After ImportAdd to Lightroom ClassicDon't add to Lightroom ClassicChoose Add to Lightroom Catalog in Lightroom Classic to add the copies to that catalog.

Under Subfolder, Setup shows where the photos you checked will land, one folder per line, with how many photos, videos and recordings go there, for example Shoots/2026-10-31 · 120 photos · 3 videos. A long folder loses its first folders; point at the line for the whole folder. With more than three folders, the third line says +2 more folders; point at it to see the rest. Until you choose a destination, the lines start with Destination. The lines stay empty while the subfolder name won't work.

Apply the Job's card writes the card the way the Job's own Apply Job Card… does. It stays gray until Add imported photos to Job… is on and a Job is picked. If that Job has no card yet, pointing at it says “Wedding” has no Job card yet. Make one with Edit Job Card… on the Job. The apply is listed in the Job's Receipts…. See Jobs.

Keywords start empty for every import. Each import's keywords become the newest in the Keyword Set's Recent Keywords, so a slot there adds one again next time. Your keywords are added to the ones a photo already has, after any card is written, so no card can remove them.

Under the box, the section also holds the Metadata panel's Keyword Set panel, with the same sets and slots. Here a slot works on this import's keywords, not on selected photos:

  • Click a slot to add its keyword to the import. Click it again to take it off. A slot is lit while its keyword is in the list.
  • In the Compact Importer, the slot keys work too: ⌥1 to ⌥9 (Alt+Shift+1 to Alt+Shift+9 on Windows). ⌥0 and ⇧⌥0 (Alt+Shift+0 and Alt+Shift+Minus) step to the next or previous set.
  • When a Job is open and its card has a Base keyword, the slot's keyword goes under it, as in the Metadata panel.

To fill the slots or switch sets, see Keyword Set.

Beside Add a “no AI training” notice, an info button explains it. Point at it, or click it to keep the note open: Radiant never trains AI on your photos. This writes a notice into each photo that tells other apps and websites not to use it for AI training. The Card Importer page has the same row and button.

Each release you attach with Attach releases gets its own row, with its file name, a menu for its type and a ✕ (Remove release). A new release starts as Model. Once the copies are verified, every release is copied into a Releases folder beside the photos, in every destination. What else it does depends on its type:

TypeWritten into every imported photo
PhotoA model release status and ID. The ID is the release's file name. The status is limited or incomplete.
ModelA model release status and ID. The ID is the release's file name.
PropertyA property release status and ID. The ID is the release's file name.
CopyrightNothing. A copyright release is only copied.

A release's ID is added to the IDs a photo already has. Point at Attach releases for a short reminder of this. The receipt names the releases it filed.

Re-read the card after copying is grayed out while Validate every copy is off. If an original reads differently the second time, its copies stay on your disk but don't count as verified. The receipt lists the file with the reason card re-read, and that original can't be deleted from the card. Flow remembers the tick, and the Compact Importer and the Card Importer page share it.

With Also copy to a second disk on, Add another destination… adds up to two more folders, for four places in all. Each click adds an empty row. Click its Choose… to pick the folder. A row you leave empty copies nothing. Flow still reads each photo off the card only once. It fills the other folders from the first copy, and checks every copy on its own disk. The button goes away once there are four rows. The Card Importer page has no button for a third or fourth folder, but a saved setup that names them still copies to all of them there.

With Build previews when done on, the build starts once the copies are verified and the import has written its metadata. It builds previews only for the photos it imported, one folder at a time, and only in the first destination. Flow shows the same notice as a folder's own Build previews, and you can stop the build there. The previews are made from the copies, so the card is never held up. If another build is running, Flow waits for it.

Score with PRISM Photo Score when done is on from the start. Flow then scores the imported photos at the same moment, in the folders the import filled in the first destination. It scores them in the background, as it scores any folder. Nothing is scored after an import you stopped. The row is grayed out while PRISM Photo Score itself is turned off; point at it to see where to turn it on. Flow remembers the tick, and a saved setup does too. See PRISM Photo Score.

The Lightroom Classic row is there only while the sidebar lists a Lightroom Classic catalog. Once the import has written its metadata into the copies, Flow adds the copies in the destination folder to that catalog, where they are, in its Radiant Flow collection, which sits in Lightroom Classic under Collections > Radiant Photo > Radiant Flow. The Radiant plug-in does this when Lightroom Classic opens the catalog. Copies in the other destinations, sidecars and audio files aren't added, and neither is a copy that failed its check. See Lightroom Classic catalogs.

A saved setup remembers every option, including the destination. It does not remember the card, the photos you checked, the folder name you type, the keywords, the releases, the first number of a rename or the Lightroom Classic catalog. Rename patterns use the same pieces as Batch Rename; see Batch Rename and Organize. The original file names are kept in each photo's metadata.

For copyright cards and the “no AI training” notice, see Copyright cards and AI training.

Folder structures

The Subfolder menu also lists the folder structures of Organize, under Structures:

  • Camera files by date makes a year folder with one folder per day inside it.
  • Shoots by month makes year, month and shoot folders.
  • Shoot with video apart makes a folder for the shoot. Inside it, the photos and the videos go into two folders of their own.
  • Keep the source's folders makes the source's own folders again. From a folder, those are its subfolders. From a camera card, those are the camera's folders, so the photos land in, for example, Shoots/DCIM/100CANON. From a phone, tablet or camera on a cable, it makes no folders. It is Organize's Original folders level; see Batch Rename and Organize.
  • The structures you saved in Organize follow, under the names you gave them. One with the Original folders level keeps a card's folders too.

Every other choice under Subfolder leaves the camera's folders out, so a card's photos land without DCIM or 100CANON in their path.

When a structure has a shoot folder, type the shoot's name in the field under Subfolder. See Batch Rename and Organize.

What gets copied

Radiant Flow copies the photos you checked, together with their .xmp and .radiant sidecars. A raw file and its JPEG always travel together. It also copies the video and audio files listed in Settings > Import > What counts as media, with their sidecars.

Everything else stays on the card. The count line says how many, for example 3 other files will stay on the card, and the card's report lists them. The import writes nothing to the card, and an existing file at the destination is never overwritten.

Some cards and folders carry an ASC MHL history, an ascmhl folder that offload tools such as Silverstack, ShotPut Pro or OffShoot leave behind. Flow then checks each file it copies against that history, during the same read. A file whose contents differ from what the history recorded is refused with the reason doesn't match the card's own manifest. Its copies stay on your disk but don't count as verified, so that original can't be deleted from the card. The receipt sums up the check, for example Checked against the card's manifest: 812 match · 0 differ · 3 not listed. If the history can't be read, the receipt says The card's manifest couldn't be read, so nothing was checked against it, and the import goes on. A card or folder without an ascmhl folder imports as before.

The Card Importer page

File > Import from Card as a Page… opens the same import as a full page, with three columns:

  • On the left, a tree of what is on the card, what was already imported, what could not be read, your Jobs and your destination.
  • In the middle, larger thumbnails, sorted by Capture Time until you choose another sort in the bar over them. Its menu has Capture Time, File Name, Kind, Checked First and Landing folder, which groups the photos by the folder each one lands in.
  • On the right, the same seven sections of options as the Compact Importer, with the same header menu. Here too, only Destination starts open.

The row at the top of the page holds the card's path. When the card's photos carry stars, flags or color labels, or come in more than one format, the same Kind menu as the Compact Importer follows it, without the Photos and Videos rows. See Filter what you import. The text box at the right of that row only narrows what you see. The Kind menu decides what is imported.

The bar at the bottom shows how many photos are checked, and how many the filter hides, with Cancel, Import Checked and Import All. Click Back to the Compact Importer to return to the smaller view, or Reset to Defaults to undo your changes on the page.

While it copies

A progress strip shows how far the import has got. Cancel is grayed out while the import runs, with Not while this import is running.

When it finishes

The receipt opens, titled Imported from “EOS_DIGITAL”. Its first line says how the import went, with a mark before it:

  • A green check when every copy landed and verified, and nothing was refused. The line says, for example, 271 photos imported and verified. With a second destination it ends in both places, and with three or four in all 3 places or in all 4 places.
  • An amber triangle when something needs a look. When one destination refused every copy while the others hold every photo verified, the line says, for example, 271 photos are safe in 3 of 4 places. Otherwise it counts, for example 271 photos imported · 268 verified in both places.
  • An info mark otherwise, for example when Validate every copy was off. The line then ends with not verified.

When videos crossed too, the line counts them, for example 271 photos and 8 videos imported and verified.

When the import wrote a copyright card, keywords, the Job's card or the “no AI training” notice, the line goes on, for example · keywords written to 271 photos · Job card applied to 271 photos or · marked 271 not for AI training. It names the releases it filed too, for example · releases filed: jane.pdf.

Under the first line, the receipt says whether the card is used up (see When a card is used up). If Flow set aside photos that were already in the destination, it says how many, for example 2 more were already in Shoots and were set aside. With Build previews when done on, a dim line adds Previews are made in the background. Any photo the keywords couldn't be written to is listed by name, with the reason.

When something needs a look

Each problem gets its own box under the first line, in plain words:

BoxWhat it means
You stopped this import. What had landed is landed.You stopped the import. The copies that landed stay.
Backup B refused the copiesA destination couldn't take the copies. The box says why and what to do (see below). Click Reveal Folder in Finder (Show Folder in Explorer on Windows) to see that folder.
2 could not be read and stay on the card: IMG_0412.CR3, IMG_0413.CR3The card wouldn't give these files up. From a folder or a device, the box says they stay there.
3 files were not verified in every placeThese copies didn't match. With one destination, the box says 3 files were not verified.
Not importedAnything else that didn't copy.

The box for a refused folder says why in one of three ways:

  • Radiant Flow can't write to this folder. Check its permissions.
  • This folder is on a disk that can't be written to. Choose another folder, then import again.
  • The disk is full. Free up space, then import again.

In each box, the files are grouped by reason, for example 5 files · Permission denied. Click the line to see the file names. Under them, click Exact messages to see the system's own words for each file. You can select and copy them, for example to send to support.

Details

Under the problems, Details is closed. At its right it says how many places the import copied to, for example 2 places. Click it to see each destination with its own count:

  • How many copies verified there, for example 271 verified.
  • not verified when Validate every copy was off.
  • Refused when the folder took none of the copies.

Each row names the folder the photos landed in at that destination, for example Shoots/2026-10-31 when they all went into one day's folder. When they landed in several folders, the row names the folder that holds them all. A destination that took none of the copies shows the folder you chose. A green check marks a destination where every copy verified, and an amber ✕ one that refused the copies.

When a path is too long, Flow shortens the folders before the last one, so the last folder's name stays in view. Point at the path to see it whole.

Once the receipt is saved, Details ends with The receipt is saved; a manifest sits beside the files.

The buttons

Under Details comes the delete line (see Delete the originals from the card). For a card, the Eject the card when done box follows. The buttons are at the bottom:

ButtonWhat it does
MoreOpens a menu with the other actions. See below.
CloseCloses the receipt.
Open in Radiant FlowCloses the receipt, opens the destination folder and selects the new photos. It isn't there when the destination folder is gone.

More holds:

CommandWhat it does
Reveal in Finder (Show in Explorer on Windows)Shows the copies in the first destination, selected.
Show importedOpens the destination folder and closes the receipt.
Select imported photosSelects the new photos and keeps the receipt open, for example to apply a copyright card.
Add to Job or New Job…Add to Job adds the imported photos to the import's Job. Without one, New Job… makes a Job and adds them to it. A raw file and its JPEG count as one photo.
Review copies…Shows each copy that landed, one by one. Needed before you can delete the originals.
Eject cardEjects the card. Only for a card.

The card is never ejected before this import's report is saved to disk. Until it is, Eject card is gray, with Eject waits until this import's report is on the disk — once this report is closed, you can eject the card from the sidebar. With Eject the card when done ticked, the receipt says Eject waits until this import's receipt is on the disk — the card ejects when the strip is dismissed.

A few seconds after the receipt opens, Flow also writes an offload report beside the photos, in every destination folder: a PDF and a CSV file named for the date and time the import started, for example Radiant Offload Report 2026-10-31 10-42-07.pdf. The PDF lists the card, when the import ran, how the copies were checked, and every file with its checksums and whether it verified in each place. It ends with the files that didn't copy and why, and a contact sheet of the copies. The CSV has one row per file, for a spreadsheet. If a folder can't take the report, a message names the folder and the reason. On Windows, the report's paths start at the drive letter, for example G:\DCIM\100CANON.

When the filter was on, the PDF's header adds a Filter row that names it, for example Format: all but JPEG · Flag: Picked, and a line with how many photos it kept out, for example 2 hidden by the filter, not imported. That way nobody checking the card against the disk takes them for lost. The CSV then adds two columns to every row: filter, the filter as text, and filteredOut, the number of photos it kept out.

Flow also sends a system notification when the import finishes. It shows the receipt's title and first line. Click it to bring Flow to the front.

  • On a Mac, macOS asks once, at your first import, whether Radiant Flow may send notifications. While you work in another app, the notification shows with a sound. While Flow is in front, it goes quietly to Notification Center.
  • On Windows, the notification shows with a sound while you work in another app. Flow also puts an icon in the notification area until you click it. To turn the notifications off, use Windows Settings > System > Notifications.

A strip also appears across the top of the destination folder: Imported 271 from EOS_DIGITAL. Click Show the 271 to see the new photos, or Show Receipt to open the receipt again. Click Dismiss when you are done. If Eject the card when done is on, dismissing the strip ejects the card. While the previews are being built, the strip also says how far it has got, for example Building previews in 2026-10-31… with a count of the photos. If the disk is short of free space, the build waits, and the strip says Previews for 2026-10-31 are paused: this disk is short of free space.

While the receipt is open and its delete window is open, the strip also shows Delete originals… in red, after a thin line. It is the receipt's own delete. The open receipt covers the strip, so click the delete button on the receipt instead. When you close the receipt, the strip's button goes away. See Delete the originals from the card.

When a card is used up

After an import that copied and checked everything on a card, Flow says the card is used up: you can format it in the camera. Flow writes nothing to the card to say so.

The card counts as used up only when Validate every copy was on, the import wasn't stopped, nothing was refused, and every copy verified. Every photo and video on the card must also have landed in this import, or in an earlier one. A photo you left unchecked, kept out with the filter or Kind, set aside because it was already in the destination, that the camera hadn't finished writing, or that couldn't be read keeps the card from being used up.

  • The receipt says so under its first line, the outcome, for example EOS_DIGITAL is used up: every photo and video on it is on your disk. Format it in the camera before your next shoot. With a second destination it says "on both disks". When the card isn't used up, the receipt says why, for example 12 stay on the card: you left them unchecked. and Not used up: 12 photos are only on this card.
  • The card's row under Devices says Used up · safe to format. Point at it to see when and where the photos went, for example Offloaded and verified on Oct 31, 2026 to Shoots, Backup. Click it to open the card's report.
  • The banner says the same when you put the card back in. See When you insert a card.
  • The Cards window marks the card Used up Oct 31, 2026. See See the history of every card.

If the camera writes new photos to the card later, the row says how many instead, for example 3 new since Oct 31, 2026 · import first. The card isn't used up until you import them.

Flow counts a photo as new when it has no record of importing it, whatever date the camera gave it. So a camera clock set to another time zone doesn't change the count. After Forget… in Settings > Import, Flow has no such record, so a used-up card counts its photos as new again.

To take the label off, right-click the card's row under Devices, or the card in the Cards window, and choose Not Used Up. Nothing on the card or on your disks changes, and Flow keeps the card's history.

Delete the originals from the card

Deleting from the card has two locks, and both must be open:

  • Validate every copy was on, and the copies matched.
  • You have looked at every copy with Review copies….

Checksums prove the bytes copied correctly. Only you can see whether they are the right photos, for example that a failing reader didn't hand over blank frames.

  1. On the receipt's delete line, click Review copies…, or choose it from More. The window is titled Review what landed in 2026-10-31.
  2. Step through the copies with Next and Previous until it says Every copy was shown.
  3. Back on the receipt, the delete line becomes The delete window is open. Click Delete {n} verified originals from “{card}”….
  4. Read the confirmation, Delete {n} verified originals from “{card}”?, which lists any files that stay on the card and why.
  5. Type the card's name in the box under To delete, type the card’s name: EOS_DIGITAL. Capitals don't matter.
  6. Click Delete. It stays gray until the name matches.

To be extra careful, select Check every original again before deleting in the confirmation. Radiant Flow then reads the whole card again, which takes as long as the import did.

Only originals that verified are removed, and with more than one destination only those verified in every one. The camera's folders, and everything else on the card, stay. Before each file is removed, Radiant Flow checks that its copies are still on disk.

When the import came off a memory card, Radiant Flow deletes originals only if the card is formatted FAT or exFAT. It checks the card first, and if it is any other kind of disk it deletes nothing. The receipt then says Nothing was deleted. Originals are deleted only from a FAT or exFAT memory card, and “EOS_DIGITAL” is not one. After an import from a folder, the folder can be on any disk, and you type the folder's name instead: To delete, type the folder’s name: 100CANON.

The info button beside The delete window is open (Why the delete window is open) shows the two locks that opened, with their counts, and why the window closes again.

While a lock is closed, the delete line shows a lock and says which lock is holding. When the review is what's missing, Review copies… sits at the end of the line.

MessageWhat to do
Delete stays locked: verify was offNothing to do for this import. Turn on Validate every copy next time.
Delete stays locked: nothing verifiedNo copy matched. Check the receipt for the reason.
Delete stays locked until the photos are verified in both placesWith two destinations, no photo verified on both disks. With three or four, the message says all 3 places or all 4 places.
Delete stays locked: {n} copies have not been shown yetFinish Review copies….

Important

You can delete originals only until you dismiss the strip at the top of the destination folder. After that, or once another import starts, the receipt is read-only. Each import earns its own delete.

Import from a phone, tablet or camera

Radiant Flow also imports from an iPhone, an iPad, an Android phone or a camera that you connect with a cable. These connect as a camera, not as a disk, so Flow calls them devices. The import works as it does for a card, in the Compact Importer, with a few differences. Flow only reads from a device. It never writes to it and never deletes anything from it.

Where the device appears

  • In the sidebar. Under Devices, after your drives, each device has a row with its name and an icon for a phone, a tablet or a camera. Click the row to open the Compact Importer on it. A device has no folders, so you can't open it in the grid or cull on it before you import.
  • In the banner. The banner at the top of the sidebar offers the device as it offers a card: Import photos from “iPhone”? with Import… and Ignore. Ignore hides it until you unplug the device and plug it in again. When a card and a device are both connected, the banner offers the card. The facts line counts the photos and videos the importer offers, and their size.
  • In the importer. The Source menu lists each device after the cards.

The setting When a card is inserted applies to devices too. With Open the Compact Importer, the importer opens by itself when you plug one in. With Do nothing, no banner appears.

File > Import from Card… and Import from Card as a Page… need a memory card. With only a device connected, they stay grayed out. Use the device's row or the banner instead. The Card Importer page imports from cards only.

Before the photos appear

Until the device's photos can be listed, the importer, and the banner, say what Flow is waiting for. Meanwhile the banner's Import… stays gray; point at it to read the same sentence. It turns on by itself once the device is ready.

MessageWhat it means
Unlock “iPhone” and tap Trust to see its photos.The phone or tablet is locked, or hasn't trusted this computer yet. Unlock it, and tap Trust if it asks. The photos then appear by themselves.
Reading the phone…The device is listing its files. A phone with many photos takes a while. A tablet or a camera says Reading the tablet… or Reading the camera….
Some photos may be in iCloud only. Import those from Photos or iCloud.The iPhone or iPad has iCloud Photos turned on. Photos kept only in iCloud aren't on the device, so Flow can't import them. The sentence stays in the line under the photos for as long as the importer is open. You see this on a Mac only.

When the device has listed every file, its photos and videos fill the grid, as a card's do.

On a Mac

The first time Flow opens a phone, tablet or camera, macOS asks whether Radiant Flow may use removable volumes. Allow it. macOS asks when you plug in a device, or when you open the importer, never just because Flow started. So until you have answered once, a device that was already plugged in when Flow started isn't listed. Unplug it and plug it in again.

If you clicked Don't Allow, macOS doesn't let Radiant Flow read the device. A few seconds after you plug it in, it still gets a row under Devices, and the banner says “iPhone” is plugged in, but macOS isn’t letting Radiant Flow read it. Under it, a line says Turn on Removable Volumes for Radiant Flow in System Settings > Privacy & Security > Files & Folders, then plug the device in again. Click Open System Settings in the banner, or click the device's row, to go straight there. Point at the row to read the same two sentences. Once macOS lets Flow read the device, its usual row takes this one's place.

MessageWhat to do
The Mac would not open “iPhone”. If Radiant Flow isn’t allowed to use removable volumes, turn it on in System Settings > Privacy & Security > Files & Folders, then plug the device in again.macOS refused to open the device. When macOS gives a reason, the message includes it.
“iPhone” isn’t answering. If the Mac is showing another app’s question about devices or removable volumes, answer it, and the photos will appear.The device hasn't answered for a minute. A question from another app that nobody has answered can hold up every app's access to devices.

On Windows

An iPhone or iPad needs Apple's driver, which comes with the Apple Devices app. Without it, Flow says Install Apple Devices from the Microsoft Store first. Click Get Apple Devices in the banner, or click the device's row, to open the app's page in the Microsoft Store. Once the app is installed, the iPhone appears like any other device.

A locked phone shows Windows no files, so Flow asks you to unlock it until its photos appear. Flow looks again every few seconds.

What is different from a card

  • Nothing to eject or delete. Instead of Eject the card when done, the importer says You can unplug the phone when the import is done. The receipt has no delete line, no Eject card and no Show Report.
  • Checking copies. Validate every copy works as it does for a card. Re-read the card after copying isn't offered.
  • One source at a time. With a device as the Source, there are no Then also import CARD_2 rows.
  • Imported before. Photos you imported before are marked Imported, so the next import from the same phone starts with only the new ones checked.
  • Live Photos. A Live Photo's still and its short video are one tile, and travel together. The tile's type mark shows the Live glyph. On a Mac, the video lands beside its still under the same name, for example IMG_0196.MOV beside IMG_0196.HEIC.
  • Tiles without a picture. A device doesn't give a thumbnail for every photo, for example an iPhone's ProRAW photos. On a Mac, the tile of a DNG photo from a phone or tablet then shows the small preview stored inside the DNG. Until the preview arrives, or if Flow can't read it, the tile shows a plain photo icon. Other photos without a thumbnail show the icon, and so do these DNG tiles on Windows. A tile that has no thumbnail after 20 seconds shows the icon too. If a picture comes later, it replaces the icon. Either way, the photo imports as usual; pointing at the tile says No preview for this file. It still imports.
  • No sidecars. Only the photos and videos are copied. An iPhone's edit files (.AAE) stay on the phone, and the count line counts them with the other files that stay on the device.
  • Names on a Mac. An iPhone's or iPad's files land under the names you know, such as IMG_0099.HEIC. A photo you edited on the phone comes as a second photo, named like IMG_E0099.JPG. A file with no name of its own, such as a video another app saved, is named by the moment it was made, for example 2026-10-14 19.58.27.MOV. The receipt says how many, for example 2 videos had no name on the phone and were named by date.
  • No card report. The import is listed under Imports like any other, but a device never appears under Cards. Show Report is grayed out with “iPhone” is not a memory card, so it has no card report.

While the import runs, the progress strip says Importing from the phone, or the tablet or the camera.

When something goes wrong

MessageWhat to do
“iPhone” was unplugged.The device was unplugged while the importer was open. The Import button stays gray until you plug it in again.
The device could not be read. Unlock it, answer any question on its screen, and plug it in again.Flow couldn't list the files on the device. Unplug it and plug it in again.
There is nothing to import on this device.The device holds no photos or videos the importer copies.
2 could not be read and stay on the deviceSome files couldn't be read. The receipt names them.

Imports and Cards in the sidebar

Imports lists your recent card imports, newest first. The note under its heading says Keeps the last ten runs. Each row shows when the import ran and how many photos it copied, with a mark at its right:

  • A green check (Verified) when copies landed and at least one of them verified.
  • A gray circle (Not verified) when copies landed but none verified, for example with Validate every copy off.
  • An amber triangle (Refused) when nothing landed. The row then says how many files were refused instead.

Point at the mark to see its word. The check doesn't mean every copy matched. The receipt says that.

Click a row to see its receipt again. It reads Read-only · run finished 10:42. Right-click a row for Show Receipt, Open in Radiant Flow, Reveal in Finder (Show in Explorer on Windows) and Show Report.

Under the list, two small buttons act on the import marked as current: a page icon for Show Receipt and a folder icon for Reveal in Finder (Show in Explorer on Windows). Point at one to see its name.

Cards lists every card you have imported from. Click a card that is in a reader to open its report. The report gives the card's capacity, used and free space, file count, the files that stay on the card, and the card's history. A card that isn't inserted is grayed out with EOS_DIGITAL — insert this card to read its report. If none of a card's imports used it up, for example because Validate every copy was off or photos stayed on the card, its row is grayed out with EOS_DIGITAL — no offload document to report on. Open that card's report with Show Report on the import's row under Imports instead.

On a Mac, when the card is in the Mac's own SD card slot, Flow can read the card's maker ID. A USB card reader can't pass it on, and Windows can't read it at all. When the ID looks odd, a line under the report's history says so, for example Hint, not proof: this card’s maker ID 0x03 usually comes with OEM ID “SD”, and this card reports “XY”. It is only a hint: a genuine card can carry an odd ID, and a fake card can copy a real one.

When you insert a card Flow has called used up, its row in Devices says Used up · safe to format. See When a card is used up.

Read the card back

Before you format a card you have doubts about, the card report can read the card once more. It reads each file the import copied and compares it with the checksum the import recorded. The report first says how many files that is, how much space they take and how long the read takes, for example Reading all 271 files (8.4 GB) back off the card takes about 6 min. If the reader measured no read speed, it gives no time.

  1. Open the card's report.
  2. Click Read every file back. The report counts the files as it goes: Reading files back off the card: 120 of 271.
  3. To stop early, click Stop or close the report.

If every file matches, the report says Every file read back correctly (271 files). Otherwise it names each file that read back different, is no longer on the card or could not be read. Either way it adds Free space on the card was not tested. An import made with Validate every copy off recorded no checksums, so its report says This run recorded no hashes, so there is nothing to read the card back against and offers no button.

See the history of every card

Click Show All Cards, the stack of cards in the Cards header, to see every card Flow has a record of, in a reader or not. Until you import from a card, it says No cards yet. A card is listed here once an offload has recorded it. Select a card on the left to see:

  • Its name and size, its product name when the reader could read it, and a line with its offloads and read errors so far. When Flow knows them, the line also says when the card was made and when Flow first saw it.
  • Read errors on 3 of the last 5 offloads. Retire this card? when two or more of its last five offloads had read errors. Flow asks only because of read errors it counted, never because of the card's age or how much you used it.
  • The SMART line: what the card itself last reported, as Unsafe Shutdowns, Media Errors and Percentage Used, or a sentence saying why there are no numbers. On a Mac, a card in a USB reader says over USB, macOS cannot ask a card about itself — NVMe SMART needs a Thunderbolt/USB4 reader.
  • Offload speed, MB/s, a line of each offload's speed, once two offloads have one. A card that has started to need retries shows up here as slower offloads.
  • Offloads, newest first: the date, the file count, the speed and the read errors, or read errors not counted when the reader doesn't count them. An import you stopped says stopped before the end. If the records of older offloads are no longer on this computer, the list says how many.

On Windows, Flow reads a card's SMART log too, from a CFexpress card in a Thunderbolt or USB4 reader. In a USB reader, the card report says over USB, this PC cannot ask a card about itself — NVMe SMART needs a Thunderbolt/USB4 reader. An SD card in the PC's own card slot says an SD card publishes no SMART log on any reader — there is nothing to ask. If Flow gets no answer at all, the report says SMART health is not available on this PC.

The Cards window shows the reading the card's report recorded. For one recorded through a USB reader, it says SMART health is not available on this PC, and it leaves the line out for a card with no recorded reading.

Settings > Import

SettingChoices (default)What it does
When a card is insertedShow a banner (default), Open the Compact Importer, Do nothingOpen the Compact Importer opens the importer once per card. The choice also applies to a phone, tablet or camera you plug in.
Open Radiant Flow when a card is inserted or a phone, tablet or camera is plugged in, even if it is closedOffStarts Radiant Flow when you insert a card or plug in a phone, tablet or camera.
What counts as mediaThe built-in listsThe file extensions the importer copies as Photos, Video and Audio, each with its sidecars. Type extensions separated by spaces.
Forget import historyNoneClick Forget… to clear the list of photos Radiant Flow has imported.

On a Mac, the setting's note says macOS will ask once for permission to see removable disks. Nothing is copied until you press Import.

On Windows, the note under the open-Radiant-Flow box says Windows asks once for each phone, tablet or camera. Choose Import photos and videos (Radiant Flow) there and it opens Radiant Flow from then on.

Radiant Flow remembers which photos it imported, so it can set them aside next time. Forget… first counts them: Forget {n} remembered imports? Those photos are offered again, without the Imported mark, the next time you read the card. No file is changed. If there is nothing to forget, it says There is no import history to forget.

Learn more